{"title":"Gage Setting and Part Measurement Systems – MIC TRAC 3000","description":"\u003cp\u003eEmploying a versatile bench mounted length measuring system allows you to measure parts, calibrate hand held gages, and preset indicator style gages.  The\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eGagemaker Shop Floor MIC TRAC™ Gage Setting and Part Measurement System (MT-3000 Series)\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003esets or zeros most gages with the standard resolution of .00005″, accuracies ranging from ±.0001″ to ±.0004″ (traceable to the NIST) and the digital read out is CE approved. The cost effective Force-Lok™ feature improves repeatability from operator to operator and is well suited for a variety of environments including the shop floor.\u003c\/p\u003e\n\u003cp\u003eThe MIC TRAC™ System is an electronic, adjustable calibration and measurement center that will inspect parts, preset indicator style gages, and calibrate a variety of hand held inspection gages. The MIC TRAC 3000 System (\u003cb\u003eMT-3000\u003c\/b\u003e) is suited for use nearly anywhere, on a shop floor to a calibration lab.\u003c\/p\u003e\n\u003cp\u003eThe MIC TRAC™ System contains receiver pads, which are precision ground in matched sets, and used as parallel surfaces for measuring or holding fixtures. The MT-3000’s digital readout (DRO) displays measurement readings in inch or metric.*\u003c\/p\u003e","products":[{"product_id":"mt-3012-50-gage-setting-and-part-measurement-systems-mic-trac-3000","title":"MT-3012-50 | Gage Setting and Part Measurement Systems – MIC TRAC 3000","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eMIC TRAC™ 12″ with DRO, Basic Setting System\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMeasuring Capacity:  Internal -0″ to 12″, External – 1½” to 13½”\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe MIC TRAC™ System is an electronic, adjustable calibration and measurement center that will inspect parts, preset indicator style gages, and calibrate a variety of hand held inspection gages.\u003c\/p\u003e\n\u003cp\u003eThe MIC TRAC 3000 System (\u003cstrong\u003eMT-3012-50\u003c\/strong\u003e) is suited for use nearly anywhere, on a shop floor to a calibration lab.\u003c\/p\u003e\n\u003cp\u003eThe MIC TRAC™ System contains receiver pads, which are precision ground in matched sets, and used as parallel surfaces for measuring or holding fixtures.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eMT-3012-50\u003c\/strong\u003e digital readout (DRO) displays measurement readings in inch or metric.*\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eMT-3012-50\u003c\/strong\u003e measurement system includes the base unit, which houses the optical scale and provides the system’s precision measuring capability.\u003c\/p\u003e\n\u003cp\u003eThe base unit may include an optional Force-Lok™ feature that provides a constant measurement force, which improves repeatability from operator to operator.\u003c\/p\u003e\n\u003cp\u003eA computer may be substituted for the system’s digital readout unit (DRO).\u003c\/p\u003e\n\u003cp\u003eThis computer comes pre-installed with our CERTIFI™ Gage Calibration software and our TDWin™ Thread Engineering software.\u003c\/p\u003e\n\u003cp\u003eFor gage calibration, the optional \u003cstrong\u003eCAL-PAK\u003c\/strong\u003e fixture package can be included with any MIC TRAC™ system.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eCAL-PAK\u003c\/strong\u003e is an assortment of fixtures that attach to the base unit for holding gages securely during the calibration process.\u003c\/p\u003e\n\u003cp\u003eProper positioning of the gage improves the accuracy of the calibration and provides more consistent results.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCalibrate Hand Held Gages, and Preset Indicator Style Gages\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDelivers high accuracy in a variety of environments including the shop floor\u003c\/li\u003e\n\u003cli\u003eServes as a setting master for gages produced by various manufacturers\u003c\/li\u003e\n\u003cli\u003eProvides fast, accurate dimensional part measurements\u003c\/li\u003e\n\u003cli\u003eEnsures measurement repeatability from operator to operator using force lok accessory\u003c\/li\u003e\n\u003cli\u003eCalibrates hand-held gages in-house for faster turnaround\u003c\/li\u003e\n\u003cli\u003eAccuracies to .0001″ (2.54µ) traceable to the NIST\u003c\/li\u003e\n\u003cli\u003eResolution of .00005″\u003c\/li\u003e\n\u003cli\u003eState of the Art Assembly of Internal Glass Scale, Precision Linear Bearing and a Set of Precisely Lapped Measuring Blocks\u003c\/li\u003e\n\u003cli\u003eElectronic Adjustable Measurement Master with Ranges from 0″ to 12″ (Units Up to 60″ Ranges)\u003c\/li\u003e\n\u003cli\u003eDigital Readout Provides Measurement Reading in Inch or Metric\u003c\/li\u003e\n\u003cli\u003eDurable Construction Allows Use in Practically Any Environment\u003c\/li\u003e\n\u003cli\u003eUnique Force Lok feature available if you plan to measure parts. It improves repeatability from operator to operator.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMIC TRAC Base Unit, 12\"Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDigital Readout \u0026amp; \u003cstrong\u003eTF-PL Blocks\u003c\/strong\u003e. Range: Internal 0\" to 12\", External 1-1\/2\" to 13-1\/2\"\u003c\/span\u003e\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45763977609250,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/MICTRAC3000_96e3ce88-1bc8-4c7f-918f-4de83a485e77.jpg?v=1789988498"},{"product_id":"mt-3012-50-t-gage-setting-and-part-measurement-systems-mic-trac-3000","title":"MT-3024-50 |Gage Setting and Part Measurement Systems – MIC TRAC 3000","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eMIC TRAC™ 24″ with DRO, Basic Setting System\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMeasuring Capacity:  Internal – 0″ to 24″, External – 1½” to 25-½”\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe MIC TRAC™ System \u003cstrong\u003eMT-3024-50\u003c\/strong\u003e is an electronic, adjustable calibration and measurement center that will inspect parts, preset indicator style gages, and calibrate a variety of handheld inspection gages.\u003c\/p\u003e\n\u003cp\u003eThe MIC TRAC 3000 System (\u003cstrong\u003eMT-3024-50\u003c\/strong\u003e) is suited for use nearly anywhere, on a shop floor to a calibration lab.\u003c\/p\u003e\n\u003cp\u003eThe MIC TRAC™ System contains receiver pads, which are precision ground in matched sets, and used as parallel surfaces for measuring or holding fixtures.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eMT-3024-50\u003c\/strong\u003e’s digital readout (DRO) displays measurement readings in inch or metric.*\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eMT-3024-50\u003c\/strong\u003e measurement system includes the base unit, which houses the optical scale and provides the system’s precision measuring capability.\u003c\/p\u003e\n\u003cp\u003eThe base unit may include an optional Force-Lok™ feature that provides a constant measurement force, which improves repeatability from operator to operator.\u003c\/p\u003e\n\u003cp\u003eA computer may be substituted for the system’s digital readout unit (DRO). This computer comes pre-installed with our CERTIFI™ Gage Calibration software and our TDWin™ Thread Engineering software.\u003c\/p\u003e\n\u003cp\u003eFor gage calibration, the optional \u003cstrong\u003eCAL-PAK\u003c\/strong\u003e fixture package can be included with any MIC TRAC™ system.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eCAL-PAK\u003c\/strong\u003e is an assortment of fixtures that attach to the base unit for holding gages securely during the calibration process.\u003c\/p\u003e\n\u003cp\u003eProper positioning of the gage improves the accuracy of the calibration and provides more consistent results.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCalibrate Hand Held Gages, and Preset Indicator Style Gages\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDelivers high accuracy in a variety of environments including the shop floor\u003c\/li\u003e\n\u003cli\u003eServes as a setting master for gages produced by various manufacturers\u003c\/li\u003e\n\u003cli\u003eProvides fast, accurate dimensional part measurements\u003c\/li\u003e\n\u003cli\u003eEnsures measurement repeatability from operator to operator using force lok accessory\u003c\/li\u003e\n\u003cli\u003eCalibrates hand-held gages in-house for faster turnaround\u003c\/li\u003e\n\u003cli\u003eAccuracies to .0001″ (2.54µ) traceable to the NIST\u003c\/li\u003e\n\u003cli\u003eResolution of .00005″\u003c\/li\u003e\n\u003cli\u003eState of the Art Assembly of Internal Glass Scale, Precision Linear Bearing and a Set of Precisely Lapped Measuring Blocks\u003c\/li\u003e\n\u003cli\u003eElectronic Adjustable Measurement Master with Ranges from 0″ to 12″ (Units Up to 60″ Ranges)\u003c\/li\u003e\n\u003cli\u003eDigital Readout Provides Measurement Reading in Inch or Metric\u003c\/li\u003e\n\u003cli\u003eDurable Construction Allows Use in Practically Any Environment\u003c\/li\u003e\n\u003cli\u003eUnique Force Lok feature available if you plan to measure parts. It improves repeatability from operator to operator.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMIC TRAC Base Unit, 24\"\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eIncludes: Digital Readout \u0026amp; TF-PL Blocks. Range: Internal 0\" to 24\", External 1-1\/2\" to 25-1\/2\"\u003c\/span\u003e\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45763984752674,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/MICTRAC3000_b94e6bd3-a816-46d8-be31-2b9b58688a82.jpg?v=1789988407"},{"product_id":"mt-3036-50-gage-setting-and-part-measurement-systems-mic-trac-3000","title":"MT-3036-50 | Gage Setting and Part Measurement Systems – MIC TRAC 3000","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eMIC TRAC™ 36′ with DRO, Basic Setting System\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMeasuring Capacity:  Internal – 0″ to 36″, External – 1½” to 37-½”\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe MIC TRAC™ System is an electronic, adjustable calibration and measurement center that will inspect parts, preset indicator style gages, and calibrate a variety of handheld inspection gages.\u003c\/p\u003e\n\u003cp\u003eThe MIC TRAC 3000 System (\u003cstrong\u003eMT-3036-50\u003c\/strong\u003e) is suited for use nearly anywhere, on a shop floor to a calibration lab.\u003c\/p\u003e\n\u003cp\u003eThe MIC TRAC™ System contains receiver pads, which are precision ground in matched sets, and used as parallel surfaces for measuring or holding fixtures.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eMT-3036-50\u003c\/strong\u003e’s digital readout (DRO) displays measurement readings in inch or metric.*\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eMT-3036-50\u003c\/strong\u003e measurement system includes the base unit, which houses the optical scale and provides the system’s precision measuring capability.\u003c\/p\u003e\n\u003cp\u003eThe base unit may include an optional Force-Lok™ feature that provides a constant measurement force, which improves repeatability from operator to operator.\u003c\/p\u003e\n\u003cp\u003eA computer may be substituted for the system’s digital readout unit (DRO).\u003c\/p\u003e\n\u003cp\u003eThis computer comes pre-installed with our CERTIFI™ Gage Calibration software and our TDWin™ Thread Engineering software.\u003c\/p\u003e\n\u003cp\u003eFor gage calibration, the optional \u003cstrong\u003eCAL-PAK\u003c\/strong\u003e fixture package can be included with any MIC TRAC™ system.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eCAL-PAK\u003c\/strong\u003e is an assortment of fixtures that attach to the base unit for holding gages securely during the calibration process. Proper positioning of the gage improves the accuracy of the calibration and provides more consistent results.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCalibrate Hand Held Gages, and Preset Indicator Style Gages\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDelivers high accuracy in a variety of environments including the shop floor\u003c\/li\u003e\n\u003cli\u003eServes as a setting master for gages produced by various manufacturers\u003c\/li\u003e\n\u003cli\u003eProvides fast, accurate dimensional part measurements\u003c\/li\u003e\n\u003cli\u003eEnsures measurement repeatability from operator to operator using force lok accessory\u003c\/li\u003e\n\u003cli\u003eCalibrates hand-held gages in-house for faster turnaround\u003c\/li\u003e\n\u003cli\u003eAccuracies to .0001″ (2.54µ) traceable to the NIST\u003c\/li\u003e\n\u003cli\u003eResolution of .00005″\u003c\/li\u003e\n\u003cli\u003eState of the Art Assembly of Internal Glass Scale, Precision Linear Bearing and a Set of Precisely Lapped Measuring Blocks\u003c\/li\u003e\n\u003cli\u003eElectronic Adjustable Measurement Master with Ranges from 0″ to 12″ (Units Up to 60″ Ranges)\u003c\/li\u003e\n\u003cli\u003eDigital Readout Provides Measurement Reading in Inch or Metric\u003c\/li\u003e\n\u003cli\u003eDurable Construction Allows Use in Practically Any Environment\u003c\/li\u003e\n\u003cli\u003eUnique Force Lok feature available if you plan to measure parts. It improves repeatability from operator to operator.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45764050616354,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/MICTRAC3000_3d428e07-7691-467c-a837-9d30d52c0b22.jpg?v=1789988010"},{"product_id":"mt-3048-50-gage-setting-and-part-measurement-systems-mic-trac-3000","title":"MT-3048-50 | Gage Setting and Part Measurement Systems – MIC TRAC 3000","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eMIC TRAC™ 48″ with DRO, Basic Setting System\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMeasuring Capacity:  Internal – 0″ to 48″, External -1½” to 49-½”\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe MIC TRAC™ System is an electronic, adjustable calibration and measurement center that will inspect parts, preset indicator style gages, and calibrate a variety of hand held inspection gages.\u003c\/p\u003e\n\u003cp\u003eThe MIC TRAC 3000 System (\u003cstrong\u003eMT-3048-50\u003c\/strong\u003e) is suited for use nearly anywhere, on a shop floor to a calibration lab.\u003c\/p\u003e\n\u003cp\u003eThe MIC TRAC™ System contains receiver pads, which are precision ground in matched sets, and used as parallel surfaces for measuring or holding fixtures.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eMT-3048-50\u003c\/strong\u003e’s digital readout (DRO) displays measurement readings in inch or metric.*\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eMT-3048-50's\u003c\/strong\u003e measurement system includes the base unit, which houses the optical scale and provides the system’s precision measuring capability.\u003c\/p\u003e\n\u003cp\u003eThe base unit may include an optional Force-Lok™ feature that provides a constant measurement force, which improves repeatability from operator to operator.\u003c\/p\u003e\n\u003cp\u003eA computer may be substituted for the system’s digital readout unit (DRO).\u003c\/p\u003e\n\u003cp\u003eThis computer comes pre-installed with our CERTIFI™ Gage Calibration software and our TDWin™ Thread Engineering software.\u003c\/p\u003e\n\u003cp\u003eFor gage calibration, the optional\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eCAL-PAK\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efixture package can be included with any MIC TRAC™ system.\u003c\/p\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eCAL-PAK\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis an assortment of fixtures that attach to the base unit for holding gages securely during the calibration process.\u003c\/p\u003e\n\u003cp\u003eProper positioning of the gage improves the accuracy of the calibration and provides more consistent results.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCalibrate Handheld Gages, and Preset Indicator Style Gages\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDelivers high accuracy in a variety of environments including the shop floor\u003c\/li\u003e\n\u003cli\u003eServes as a setting master for gages produced by various manufacturers\u003c\/li\u003e\n\u003cli\u003eProvides fast, accurate dimensional part measurements\u003c\/li\u003e\n\u003cli\u003eEnsures measurement repeatability from operator to operator using force lok accessory\u003c\/li\u003e\n\u003cli\u003eCalibrates hand-held gages in-house for faster turnaround\u003c\/li\u003e\n\u003cli\u003eAccuracies to .0001″ (2.54µ) traceable to the NIST\u003c\/li\u003e\n\u003cli\u003eResolution of .00005″\u003c\/li\u003e\n\u003cli\u003eState of the Art Assembly of Internal Glass Scale, Precision Linear Bearing and a Set of Precisely Lapped Measuring Blocks\u003c\/li\u003e\n\u003cli\u003eElectronic Adjustable Measurement Master with Ranges from 0″ to 12″ (Units Up to 60″ Ranges)\u003c\/li\u003e\n\u003cli\u003eDigital Readout Provides Measurement Reading in Inch or Metric\u003c\/li\u003e\n\u003cli\u003eDurable Construction Allows Use in Practically Any Environment\u003c\/li\u003e\n\u003cli\u003eUnique Force Lok feature available if you plan to measure parts. It improves repeatability from operator to operator.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45764060250146,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/MICTRAC3000_aa86ebd2-3ebf-45ba-acfa-d5671dd1f269.jpg?v=1789987853"},{"product_id":"mt-3012f-50-gage-setting-and-part-measurement-systems","title":"MT-3012F-50 | MIC TRAC™ Setting System with Force Lok | Gage Setting and Part Measurement Systems – MIC TRAC 3000","description":"\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eGagemaker MT‑3012F‑50\u003c\/strong\u003e is a \u003cstrong\u003e12″ MIC TRAC™ 3000 Force‑Lok System\u003c\/strong\u003e engineered for high‑precision gage setting, calibration, and part measurement. Designed for demanding shop‑floor and calibration‑lab environments, the \u003cstrong\u003eMT‑3012F‑50\u003c\/strong\u003e delivers exceptional repeatability through its \u003cstrong\u003eForce‑Lok mechanism\u003c\/strong\u003e, ensuring consistent measurement force for every reading.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis system serves as a \u003cstrong\u003emaster reference standard\u003c\/strong\u003e, allowing operators to set, zero, and verify a wide range of inspection gages with unmatched accuracy. Whether used for API thread inspection, manufacturing QA, or metrology applications, the MT‑3012F‑50 provides the reliability and precision required for critical dimensional control.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul role=\"list\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eForce‑Lok System\u003c\/strong\u003e for controlled repeatable measurement force\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e12″ MIC TRAC™ base unit\u003c\/strong\u003e with high‑accuracy receiver pads\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eDigital Readout (DRO)\u003c\/strong\u003e for real‑time, high‑resolution measurements\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePrecision‑ground reference surfaces\u003c\/strong\u003e for stable and consistent calibration\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSupports gage setting \u0026amp; part measurement\u003c\/strong\u003e with optional fixtures\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIdeal for API, OCTG, machining, and calibration labs\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eRobust shop‑floor design\u003c\/strong\u003e with lab‑grade accuracy\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThe\u003cstrong\u003e Force‑Lok version \u003c\/strong\u003eof the MIC TRAC™ 3000 series provides superior repeatability, making it the preferred choice for environments where measurement consistency is critical. Its versatility, rugged construction, and precision make it a trusted solution across oil \u0026amp; gas, machining, aerospace, and industrial inspection sectors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eMIC TRAC Base Unit, 12\" Force-Lok i\u003c\/strong\u003e\u003cstrong\u003encludes:\u003c\/strong\u003e Digital Readout \u0026amp; TF-PL Blocks. Range: Internal 0\" to 12\", External 1-1\/2\" to 13-1\/2\"\u003c\/span\u003e\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45769091317794,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/MICTRAC3000_48c9de35-6d45-480a-a856-229686027bad.jpg?v=1789986731"},{"product_id":"mt-3024f-50-gage-setting-part-measurement-system","title":"MT‑3024F‑50 |MIC TRAC™ Setting System with Force Lok | Gage Setting \u0026 Part Measurement System – MIC TRAC 3000","description":"\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eGagemaker MT‑3024F‑50\u003c\/strong\u003e is a \u003cstrong\u003e24″ MIC TRAC™ 3000 Force‑Lok System\u003c\/strong\u003e designed for precision gage setting, calibration, and part measurement across demanding industrial environments. With its extended 24-inch capacity and \u003cstrong\u003eForce‑Lok constant-force mechanism\u003c\/strong\u003e, the \u003cstrong\u003eMT‑3024F‑50\u003c\/strong\u003e ensures repeatable, operator‑independent measurements for superior accuracy and consistency.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEngineered for calibration labs, machining facilities, and OCTG inspection operations, this system functions as a \u003cstrong\u003emaster reference standard\u003c\/strong\u003e, enabling fast, reliable verification of a wide range of inspection gages and dimensional tools.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul role=\"list\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eForce‑Lok System\u003c\/strong\u003e for consistent, repeatable measurement force\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e24″ MIC TRAC™ base unit\u003c\/strong\u003e for extended measurement applications\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eHigh‑resolution Digital Readout (DRO)\u003c\/strong\u003e with inch\/metric capability\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePrecision‑ground receiver pads\u003c\/strong\u003e for stable, accurate reference surfaces\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSupports both gage setting \u0026amp; part measurement\u003c\/strong\u003e with optional fixtures\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIdeal for API, OCTG, machining, aerospace, and metrology labs\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eDurable shop‑floor construction\u003c\/strong\u003e with laboratory‑grade precision\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003ch2\u003e\u003cstrong\u003eWhy Choose the MT‑3024F‑50?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eWith its extended 24-inch range and Force‑Lok controlled‑force system, the \u003cstrong\u003eMT‑3024F‑50\u003c\/strong\u003e delivers \u003cstrong\u003eexceptional repeatability\u003c\/strong\u003e, making it ideal for operations requiring consistent, traceable dimensional accuracy. Its versatility, rugged build, and compatibility with a wide range of fixtures make it a trusted solution across oil \u0026amp; gas, machining, aerospace, and industrial inspection sectors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"stockcodedetailcat\"\u003e\n\u003cspan\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"stockcodedetailcat\"\u003e\u003cspan id=\"lblStockCodeName\"\u003e\u003cstrong\u003eMIC TRAC Base Unit, 24\" Force-Lok \u003c\/strong\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e Digital Readout \u0026amp; TF-PL Blocks. Range: Internal 0\" to 24\", External 1-1\/2\" to 25-1\/2\"\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"cleardiv select-priceqtycat\"\u003e\n\u003cdiv class=\"priceqtycat\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45769344024610,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/MICTRAC3000_5ad0c177-6ffc-4663-9254-f394809f474a.jpg?v=1789986529"},{"product_id":"mt-3036f-50-gage-setting-part-measurement-system-mic-trac-3000","title":"MT-3036F-50 |MIC TRAC™ Setting System with Force Lok | Gage Setting \u0026 Part Measurement System – MIC TRAC 3000","description":"\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eGagemaker MT‑3036F‑50\u003c\/strong\u003e is a \u003cstrong\u003e36″ MIC TRAC™ 3000 Force‑Lok System\u003c\/strong\u003e engineered for high‑precision gage setting, calibration, and part measurement in demanding industrial environments. With its extended 36-inch capacity and \u003cstrong\u003eForce‑Lok constant-force mechanism\u003c\/strong\u003e, the \u003cstrong\u003eMT‑3036F‑50\u003c\/strong\u003e ensures consistent, repeatable measurements—eliminating operator variability and improving dimensional accuracy.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDesigned for calibration labs, machining facilities, aerospace, and OCTG inspection operations, this system functions as a \u003cstrong\u003emaster reference standard\u003c\/strong\u003e, enabling fast, reliable verification of a wide range of inspection gages and dimensional tools.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul role=\"list\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eForce‑Lok System\u003c\/strong\u003e for controlled, repeatable measurement force\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e36″ MIC TRAC™ base unit\u003c\/strong\u003e for large‑range measurement applications\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eHigh‑resolution Digital Readout (DRO)\u003c\/strong\u003e with inch\/metric capability\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePrecision‑ground receiver pads\u003c\/strong\u003e for stable, accurate reference surfaces\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSupports gage setting \u0026amp; part measurement\u003c\/strong\u003e with optional fixtures\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIdeal for API, OCTG, machining, aerospace, and metrology labs\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eDurable shop‑floor construction\u003c\/strong\u003e with laboratory‑grade precision\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eMIC TRAC Base Unit, 36\" Force-Lok i\u003c\/strong\u003e\u003cstrong\u003encludes:\u003c\/strong\u003e Digital Readout \u0026amp; TF-PL Blocks. Range: Internal 0\" to 36\", External 1-1\/2\" to 37-1\/2\"\u003c\/span\u003e\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45769556033570,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/MICTRAC3000_52b6bc22-0bd0-4a47-8650-47a0968f57f1.jpg?v=1789986255"},{"product_id":"mt-3048f-50-gage-setting-part-measurement-system-mic-trac-3000","title":"MT‑3048F‑50 |MIC TRAC™ Setting System with Force Lok | Gage Setting \u0026 Part Measurement System – MIC TRAC 3000","description":"\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eGagemaker MT‑3048F‑50\u003c\/strong\u003e is a \u003cstrong\u003e48″ MIC TRAC™ 3000 Force‑Lok System\u003c\/strong\u003e engineered for large‑capacity, high‑precision gage setting, calibration, and part measurement. With its extended 48-inch measuring range and \u003cstrong\u003eForce‑Lok constant‑force mechanism\u003c\/strong\u003e, the \u003cstrong\u003eMT‑3048F‑50\u003c\/strong\u003e delivers consistent, repeatable measurements—eliminating operator influence and ensuring superior dimensional accuracy.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBuilt for calibration laboratories, machining facilities, aerospace, heavy industry, and OCTG inspection operations, this system serves as a \u003cstrong\u003emaster reference standard\u003c\/strong\u003e, enabling fast, reliable verification of a wide range of inspection gages and dimensional tools.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul role=\"list\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eForce‑Lok System\u003c\/strong\u003e for controlled, repeatable measurement force\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e48″ MIC TRAC™ base unit\u003c\/strong\u003e for extra‑large measurement applications\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eHigh‑resolution Digital Readout (DRO)\u003c\/strong\u003e with inch\/metric capability\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePrecision‑ground receiver pads\u003c\/strong\u003e for stable, accurate reference surfaces\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSupports gage setting \u0026amp; part measurement\u003c\/strong\u003e with optional fixtures\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIdeal for API, OCTG, machining, aerospace, and metrology labs\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eRugged shop‑floor construction\u003c\/strong\u003e with laboratory‑grade precision\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eMIC TRAC Base Unit, 48\" Force-Lok I\u003c\/strong\u003e\u003cstrong\u003encludes:\u003c\/strong\u003e Digital Readout \u0026amp; TF-PL Blocks. Range: Internal 0\" to 48\", External 1-1\/2\" to 49-1\/2\"\u003c\/span\u003e\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45769955115042,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/MICTRAC3000.jpg?v=1789978636"},{"product_id":"tf-10-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"TF-10 |MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eTF-10, Tapered Setting Blocks 10° half angle, set of 2.\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eTF-10\u003c\/strong\u003e receiver blocks include precision , calibrated surfaces designed for mounting all the various setting blocks.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDepending on the requirements of the application, each pair of MIC TRAC setting blocks is precisely ground with either a flat or tapered gauging surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSetting blocks are supplied in sets of two, with various degrees of taper available.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGAGEMAKER TF-10: \u003c\/strong\u003eSetting Blocks, Tapered,10° Half Angle\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45771774066722,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/TF-.75T_TaperedSettingBlocks_05b38834-3e81-493e-96ed-a969881f40a2.png?v=1789978140"},{"product_id":"gagemaker-tf-15-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"GAGEMAKER TF-15| MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eTapered Setting Blocks 15° half angle, set of 2\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eTF-15\u003c\/strong\u003e receiver blocks include precision, calibrated surfaces designed for mounting all the various setting blocks.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDepending on the requirements of the application, each pair of MIC TRAC setting blocks is precisely ground with either a flat or tapered gauging surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSetting blocks are supplied in sets of two, with various degrees of taper available.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eGAGEMAKER TF-15\u003c\/strong\u003e: Setting Blocks, Tapered, 15° Half Angle\u003c\/span\u003e\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45771786551330,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/TF-.75T_TaperedSettingBlocks_b195db9c-7fbf-450d-952b-a31147157460.png?v=1789976324"},{"product_id":"gagemaker-tf-20-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"GAGEMAKER TF-20 | MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cstrong\u003eTapered Setting Blocks 20° half angle\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eGagemaker TF‑20\u003c\/strong\u003e is a precision‑ground pair of \u003cstrong\u003e20° half‑angle tapered setting blocks\u003c\/strong\u003e designed for use with MIC TRAC™ 3000 systems. These blocks provide a stable, calibrated reference surface for setting and verifying a variety of inspection gages.\u003c\/p\u003e\n\u003cp\u003eManufactured to tight tolerances, the\u003cstrong\u003e TF‑20 \u003c\/strong\u003eensures consistent alignment and repeatable measurements when mounted on MIC TRAC receiver pads. Whether used in API seal ring groove inspection, machining environments, or calibration labs, the \u003cstrong\u003eTF‑20\u003c\/strong\u003e delivers the accuracy required for critical dimensional control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGAGEMAKER TF-20\u003c\/strong\u003e: \u003cspan\u003eSetting Blocks, Tapered, \u003c\/span\u003e\u003cspan\u003e20° Half Angle.\u003c\/span\u003e\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45771828527138,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/GageSettingMasters-R_RX_e7f171dd-8301-49c7-9cc6-1898b9c76d5d.png?v=1789975967"},{"product_id":"gagemaker-tf-30-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"GAGEMAKER TF-30 | MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cstrong\u003eTapered Setting Blocks 30° half angle\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eGagemaker TF‑30\u003c\/strong\u003e is a precision‑ground pair of \u003cstrong\u003e30° half‑angle tapered setting blocks\u003c\/strong\u003e designed for use with MIC TRAC™ 3000 systems. These blocks provide a stable, calibrated reference surface for setting and verifying a variety of inspection gages.\u003c\/p\u003e\n\u003cp\u003eManufactured to tight tolerances, the TF‑30 ensures consistent alignment and repeatable measurements when mounted on MIC TRAC receiver pads. Ideal for API seal ring groove inspection, machining environments, and calibration labs, the TF‑30 delivers the accuracy required for critical dimensional control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGAGEMAKER TF-30: \u003c\/strong\u003e\u003cspan\u003eSetting Blocks, Tapered, \u003c\/span\u003e\u003cspan\u003e30° Half Angle.\u003c\/span\u003e\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45771838357538,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/TF-.75T_TaperedSettingBlocks_ebb66b3e-a8ef-4a11-b96b-2280833e8ce7.png?v=1789975693"},{"product_id":"gagemaker-tf-40-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"TF-40| MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cstrong\u003eTapered Setting Blocks 40° half angle\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eGagemaker TF‑40\u003c\/strong\u003e is a precision‑ground pair of \u003cstrong\u003e40° half‑angle tapered setting blocks\u003c\/strong\u003e engineered for use with MIC TRAC™ 3000 systems. These blocks provide a stable, calibrated reference surface for setting and verifying specialized inspection gages.\u003c\/p\u003e\n\u003cp\u003eManufactured to exacting tolerances, the \u003cstrong\u003eTF‑40\u003c\/strong\u003e ensures consistent alignment and repeatable measurements when mounted on MIC TRAC receiver pads. Ideal for API seal ring groove inspection, machining environments, and calibration laboratories, the \u003cstrong\u003eTF‑40\u003c\/strong\u003e delivers the accuracy required for critical dimensional control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGAGMAKER TF-40: \u003c\/strong\u003eSetting Blocks, Tapered, \u003cspan\u003e40° Half Angle.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45771853398050,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/TF-.75T_TaperedSettingBlocks_9a507e3e-6b79-49e4-8e7e-76df42d60f11.png?v=1789975314"},{"product_id":"gagemaker-tf-5f-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"GAGEMAKER TF-.5F| MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eTF-.5F Universal flat face setting \/ measuring blocks\u003c\/strong\u003e (1.000” outside dim.)\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eTF-.5F\u003c\/strong\u003e setting blocks are replaceable anvils that have an accurate taper ground into the gauging surfaces.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe setting blocks are supplied in sets of 2 and mount on the MIC TRAC 3000 receiver blocks.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eGagemaker TF‑.5F\u003c\/strong\u003e is a \u003cstrong\u003euniversal flat‑face setting block\u003c\/strong\u003e designed for use with MIC TRAC™ 3000 systems. With a \u003cstrong\u003e1.0000″ outside dimension\u003c\/strong\u003e, this precision‑ground block provides a stable, calibrated reference surface for setting and verifying a wide range of inspection gages.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAs a replaceable anvil for the MIC TRAC system, the TF‑.5F ensures consistent, repeatable alignment when mounted on MIC TRAC receiver pads. Its flat‑face geometry makes it ideal for applications requiring parallel, non‑tapered reference surfaces in machining, calibration, and metrology environments.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGAGEMAKER TF-.5F:\u003c\/strong\u003e \u003cspan\u003eSetting Blocks, Straight, \u003c\/span\u003e\u003cspan\u003eCarbide Flat Face, 1.000\" Outside Dimension (Set of Two)\u003c\/span\u003e\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45771881283618,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/TF-1F_323c4eb7-7350-4c58-abd4-f15bb0fd2332.png?v=1789975019"},{"product_id":"tf-1f-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"TF-1F| MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eMIC TRAC SETTING BLOCKS\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eTF-1F Universal flat face setting \/ measuring blocks\u003c\/strong\u003e (1.500” outside dim.)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe MIC TRAC 3000 setting blocks are replaceable anvils that have an accurate taper ground into the gauging surfaces.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe setting blocks are supplied in sets of 2 and mount on the MIC TRAC 3000 receiver blocks.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eGagemaker TF‑1F\u003c\/strong\u003e is a precision‑ground \u003cstrong\u003euniversal flat‑face setting block\u003c\/strong\u003e designed for use with MIC TRAC™ 3000 systems. With a \u003cstrong\u003e1.0000″ outside dimension\u003c\/strong\u003e, this block provides a stable, calibrated reference surface for setting and verifying a wide range of inspection gages.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAs a replaceable anvil for the MIC TRAC system, the \u003cstrong\u003eTF‑1F\u003c\/strong\u003e ensures consistent, repeatable alignment when mounted on MIC TRAC receiver pads. Its flat‑face geometry makes it ideal for applications requiring parallel, non‑tapered reference surfaces in machining, calibration, and metrology environments.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGAGEMAKER TF-1F:\u003c\/strong\u003e \u003cspan\u003eSetting Blocks, Straight\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eNarrow, 1.500\" Outside Dimension (Set of Two)\u003c\/span\u003e\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45772007800866,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/TF-1F_8122076c-ca5a-4a23-a4b6-05d69bdca23f.png?v=1789974632"},{"product_id":"tf-pl-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"TF-PL| MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cspan\u003eGagemaker - \u003cstrong\u003eFlat Face Setting Blocks\u003c\/strong\u003e, No Taper (Supplied with Mic Trac (tm))\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eGagemaker TF‑PL\u003c\/strong\u003e is a precision‑ground \u003cstrong\u003esetting block set\u003c\/strong\u003e designed specifically for MIC TRAC™ 3000 systems. These blocks serve as the \u003cstrong\u003eprimary calibrated reference standard\u003c\/strong\u003e used to set, zero, and verify a wide range of inspection gages.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eManufactured to extremely tight tolerances, the TF‑PL blocks ensure stable, repeatable alignment when mounted on MIC TRAC receiver pads. They are included with all Force‑Lok MIC TRAC systems and are essential for maintaining traceable, high‑accuracy calibration workflows in machining, OCTG, aerospace, and metrology environments.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGAGEMAKER-TF-PL:\u003c\/strong\u003e \u003cspan\u003eSetting Blocks, Straight, Wide \u003c\/span\u003e\u003cspan\u003e1.500\" Outside Dimension (Set of Two)\u003c\/span\u003e\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45772115345442,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/TF-PL.png?v=1789973934"},{"product_id":"tf-bx-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"TF-BX| MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cstrong\u003e23° BXR Ring Groove Diameter\/Width Setting Blocks, used with BX-1000 gages \u003cbr\u003e(2 per set)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eGAGEMAKER TF‑BX\u003c\/strong\u003e is a precision‑ground \u003cstrong\u003esetting block set\u003c\/strong\u003e engineered \u003cstrong\u003especifically\u003c\/strong\u003e for use with \u003cstrong\u003eBX‑1000 Series Groove Diameter Gages\u003c\/strong\u003e on MIC TRAC™ 3000 systems. These blocks provide the calibrated, repeatable reference surfaces required to accurately set and verify BX‑series gages used in API 6A seal ring groove inspection.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eManufactured to extremely tight tolerances, the \u003cstrong\u003eTF‑BX\u003c\/strong\u003e ensures stable alignment and consistent measurement performance when mounted on MIC TRAC receiver pads. It is the essential accessory for technicians performing BX‑groove dimensional inspection in machining, oil \u0026amp; gas, and metrology environments.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGAGEMAKER TF-BX: \u003c\/strong\u003eSetting Blocks, BX Style\u003cbr\u003e23° Half Angle, BX, R, \u0026amp; RX Ring Groove Diameter \/ Width.\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45772160663586,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/TF-BX.png?v=1789973741"},{"product_id":"tf-1v-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"TF-1V | MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cstrong\u003e3-5 pitch 60° “V” thread setting blocks (2 per set)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Gagemaker \u003cstrong\u003eTF‑1V\u003c\/strong\u003e is a precision‑ground V‑block setting anvil designed for use with MIC TRAC™ 3000 systems. Its \u003cstrong\u003eV\u003c\/strong\u003e‑shaped geometry provides a stable, self‑centering reference surface for holding and aligning cylindrical parts, pins, rods, and round inspection tools during calibration and measurement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGAGEMAKER TF-1V: \u003c\/strong\u003e\u003cspan\u003eThread Setting Blocks\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e60° \"V\" Thread, 3 - 5 Threads per Inch.\u003c\/span\u003e\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45772237570082,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/TF-1V_399cd6c0-32c2-4784-b75c-e3ba3e0e1d86.png?v=1789973439"},{"product_id":"tf-30-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"TF-30  |MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cstrong\u003eTapered Setting Blocks 30° half angle\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Gagemaker TF‑30 is a precision‑ground pair of 30° half‑angle tapered setting blocks designed for use with MIC TRAC™ 3000 systems. These blocks provide a stable, calibrated reference surface for setting and verifying a variety of inspection gages.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGAGEMAKER TF-30\u003c\/strong\u003e: \u003cspan\u003eSetting Blocks, Tapered\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e30° Half Angle\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45772266307618,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/TF-.75T_TaperedSettingBlocks_2e33c0af-d765-4e99-b20c-333e93c1f2f0.png?v=1789973305"},{"product_id":"tf-5f-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"TF-.5F | MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cstrong\u003eFlat Face Setting Blocks (1.000” outside diameter)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eGagemaker TF‑.5F\u003c\/strong\u003e is a universal flat‑face setting block designed for use with MIC TRAC™ 3000 systems. With a 1.0000″ outside dimension, this precision‑ground block provides a stable, calibrated reference surface for setting and verifying a wide range of inspection gages.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGAGEMAKER TF-.5F: \u003c\/strong\u003e\u003cspan\u003eSetting Blocks, Straight\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCarbide Flat Face, 1.000\" Outside Dimension (Set of Two)\u003c\/span\u003e\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45772295733282,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/TF-1F_b531deee-8f41-4fe6-af6f-1b1ca99f47e2.png?v=1789972891"},{"product_id":"tf-15-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"TF-15 | MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cstrong\u003eTapered Setting Blocks 15° half angle\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Gagemaker \u003cstrong\u003eTF‑15\u003c\/strong\u003e is a precision‑ground 15-inch setting block engineered for use with MIC TRAC™ 3000 gage setting and part measurement systems. As part of Gagemaker’s TF‑Series reference standards, the \u003cstrong\u003eTF‑15\u003c\/strong\u003e provides a stable, calibrated length reference used to set, verify, and check the accuracy of a wide range of dimensional inspection gages.\u003c\/p\u003e\n\u003cp\u003eManufactured to strict tolerances, the TF‑15 ensures consistent, repeatable alignment when mounted on MIC TRAC receiver pads. It is ideal for calibration labs, machining facilities, aerospace, and OCTG inspection environments requiring traceable, high‑accuracy length standards.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGAGEMAKER TF-15: \u003c\/strong\u003eSetting Blocks, Tapered\u003cstrong\u003e\u003cbr\u003e\u003cspan\u003e15° Half Angle\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45772363628578,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/GAGEMAKERBLOCKSIMAGE2.png?v=1789650317"},{"product_id":"tf-2v-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"TF-2V | MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cstrong\u003e6-20 pitch 60° “V” thread setting blocks (2 per set)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eGagemaker TF‑2V\u003c\/strong\u003e is a precision‑ground \u003cstrong\u003edual‑height V‑block setting anvil\u003c\/strong\u003e engineered for use with MIC TRAC™ 3000 gage setting and part measurement systems. Its \u003cstrong\u003eV\u003c\/strong\u003e‑shaped geometry provides a stable, self‑centering reference surface for holding and aligning cylindrical parts, pins, rods, and round inspection tools during calibration and measurement.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eTF‑2V\u003c\/strong\u003e offers a \u003cstrong\u003etaller V‑block profile\u003c\/strong\u003e compared to the TF‑1V, making it ideal for supporting larger diameters or elevating round components to the correct measuring height. Manufactured to Gagemaker’s strict tolerances, it ensures consistent, repeatable alignment when mounted on MIC TRAC receiver pads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eGAGEMAKER TF-2V:\u003c\/strong\u003e Thread Setting Blocks\u003cbr\u003e60° \"V\" Thread, 6 - 20 Threads per Inch\u003c\/span\u003e\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45772405604386,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/TF-1V.png?v=1789646233"},{"product_id":"tf-str-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"TF-STR |MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cstrong\u003eStraight Blocks\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTF-STR, Straight Setting Blocks, set of 2.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eTF-STR\u003c\/strong\u003e blocks include precision, calibrated surfaces designed for mounting all the various setting blocks.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDepending on the requirements of the application, each pair of MIC TRAC setting blocks is precisely ground with either a flat or tapered gauging surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSetting blocks are supplied in sets of two, with various degrees of taper available.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGAGEMAKER TF-STR:  \u003c\/strong\u003e\u003cspan id=\"lblStockCodeName\"\u003eSetting Blocks, Straight\u003c\/span\u003e\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45772413632546,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/TF-.75T_TaperedSettingBlocks_4a468fb2-6238-418c-8cdd-ee8b5b31985d.png?v=1789645259"},{"product_id":"tf5b-75t-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"TF5B-.75T | MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cstrong\u003e¾” Taper Blocks, 8 \u0026amp; 10 Round, ¾” TPF Buttress, Line Pipe\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eGagemaker TF5B‑.75T\u003c\/strong\u003e is a precision‑machined \u003cstrong\u003e¾\" Tapered Setting Block\u003c\/strong\u003e engineered for accurate calibration of thread inspection gages used in oilfield, OCTG, and premium tubular manufacturing. Built to Gagemaker’s strict dimensional standards, this block ensures your taper gages deliver repeatable, reliable measurements every time.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDesigned for shops that demand uncompromising accuracy, the \u003cstrong\u003eTF5B‑.75T\u003c\/strong\u003e provides a stable reference surface for verifying \u003cstrong\u003e0.75 TPF\u003c\/strong\u003e tapered thread forms across a wide range of applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan id=\"lblStockCodeNameValue\"\u003e\u003cstrong\u003eGAGEMAKER TF5B-.75T: \u003c\/strong\u003eTaper Blocks, API 5B, 0.750 TPF\u003cbr\u003e4.917\" Tall All Sizes: 2-3\/8\" to 20\" All Styles: NU, EU, SC, LC, BC All Grades, Pin \u0026amp; Box (6.250% Taper), (1:16 Taper)\u003c\/span\u003e\u003c\/div\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45775837691938,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/TF-.75T_TaperedSettingBlocks_dbb8f5b2-6baa-49d4-8014-e6f6892111c0.png?v=1789628298"},{"product_id":"tf5b-1-00t-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"TF5B-1.00T | MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cstrong\u003e1” Taper Blocks, 1” TPF Buttress\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eGagemaker TF5B‑1.00T\u003c\/strong\u003e is a precision‑machined \u003cstrong\u003e1.000\" Tapered Setting Block\u003c\/strong\u003e engineered for calibrating and verifying 5B‑series taper gages used in critical thread inspection environments. Manufactured to Gagemaker’s exacting tolerances, this block provides a stable, repeatable reference standard that ensures your taper measurements remain accurate, consistent, and fully compliant with API and OEM specifications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBuilt for demanding industrial environments, the \u003cstrong\u003eTF5B‑1.00T\u003c\/strong\u003e delivers the reliability required by OCTG threading shops, premium connection manufacturers, and high‑precision QC labs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGAGEMAKER TF5B-1.00T: \u003cspan\u003eTaper Blocks, API 5B, 1.000 TPF\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e4.917\" Tall Sizes: 16\" to 20\" Style: BC All Grades, Pin \u0026amp; Box (8.333% Taper), (1:12 Taper)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45775876325410,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/TF-.75T_TaperedSettingBlocks_9755f000-e366-4586-8840-f6adf84d29c9.png?v=1789629902"},{"product_id":"tf-1-12t-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"TF-1.12T | MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cstrong\u003e1⅛” Taper Blocks, 1.125 TPF Connection\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eTF-1.12T, 1.125″ TPF Connection, Tapered Setting Blocks, set of 2.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplication:  1.125” TPF Buttress Casing Setting Blocks\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eTF-1.12T\u003c\/strong\u003e receiver blocks include precision, calibrated surfaces designed for mounting all the various setting blocks.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDepending on the requirements of the application, each pair of MIC TRAC setting blocks is precisely ground with either a flat or tapered gauging surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSetting blocks are supplied in sets of two, with various degrees of taper available.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGAGEMAKER TF-1.12T : \u003c\/strong\u003eSetting Blocks, Tapered\u003cbr\u003e1.125 TPF, (9.375% Taper), (1:10.666 Taper)\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45775967846434,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/TF-.75T_TaperedSettingBlocks_2d8836bb-68c2-4c06-acc3-31ccc919b49b.png?v=1789628373"},{"product_id":"tf-1-75t-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"TF-1.75T | MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cstrong\u003e1¾” Taper Blocks, 1.75 TPF Connections\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eGagemaker TF‑1.75T\u003c\/strong\u003e is a precision‑machined \u003cstrong\u003e1.75\" Tapered Setting Block\u003c\/strong\u003e engineered to provide a stable, repeatable reference for calibrating taper gages used in high‑accuracy thread inspection. Manufactured to Gagemaker’s industry‑leading tolerances, this block ensures your taper measurements remain consistent, reliable, and fully compliant with API and OEM specifications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBuilt for demanding industrial environments, the TF‑1.75T delivers the dimensional integrity required by OCTG threading shops, premium connection manufacturers, and advanced QC labs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGAGEMAKER TF-1.75T:\u003c\/strong\u003e \u003cspan id=\"lblStockCodeName\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan id=\"lblStockCodeNameValue\"\u003eSetting Blocks, Tapered\u003cbr\u003e1.750 TPF, (14.583% Taper), (1:6.857 Taper)\u003c\/span\u003e\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45776511074338,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/TF-.75T_TaperedSettingBlocks.png?v=1789628144"},{"product_id":"tf-1f-t-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"TF-1F-T | MIC TRAC™ Blocks, Fixtures and Accessories|Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cstrong\u003eFlat face setting blocks to accept riser block (T-Shape)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eMIC TRAC SETTING BLOCKS\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eTF-1F Universal flat face setting \/ measuring blocks\u003c\/strong\u003e (1.500” outside dim.)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eTF-1F-T\u003c\/strong\u003e setting blocks are replaceable anvils that have an accurate taper ground into the gauging surfaces.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe setting blocks are supplied in sets of 2 and mount on the MIC TRAC 3000 receiver blocks. Model Des\u003c\/span\u003e\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45776516546594,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/TF-1F-T.png?v=1789627453"},{"product_id":"tf-riser1-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"TF-RISER1 |MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cstrong\u003e1.00” Riser Block (Set of 2) \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eGagemaker TF‑RISER1\u003c\/strong\u003e is a precision‑machined \u003cstrong\u003e1.00\" Riser Block Set\u003c\/strong\u003e designed to elevate and support gages, fixtures, and components during MIC TRAC calibration and measurement procedures. Manufactured to Gagemaker’s strict dimensional standards, these riser blocks ensure stable, repeatable positioning for accurate and reliable inspection results.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWhether you’re calibrating thread gages, setting up specialty fixtures, or supporting parts for dimensional checks, the \u003cstrong\u003eTF‑RISER1 \u003c\/strong\u003eprovides the rigidity and precision required in high‑accuracy metrology environments.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGAGEMAKER TF-RISER1: \u003c\/strong\u003eRiser Block, 1.00\" Tall (Set of 2)\u003cbr\u003e\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45776521166882,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/TF-RISER1.png?v=1789626749"},{"product_id":"tf-riser2-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"TF-RISER2 | MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cstrong\u003e2.00” Riser Block (Set of 2)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eGagemaker TF‑RISER2\u003c\/strong\u003e is a precision‑machined \u003cstrong\u003e2.00\" Riser Block Set\u003c\/strong\u003e designed to elevate and support gages, fixtures, and components during MIC TRAC calibration and dimensional inspection. Manufactured to Gagemaker’s strict tolerances, these riser blocks provide stable, repeatable positioninG—ensuring accurate, consistent measurement results in demanding industrial environments.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWhether you’re calibrating thread gages, setting up specialty fixtures, or supporting parts for metrology applications, the \u003cstrong\u003eTF‑RISER2\u003c\/strong\u003e delivers the rigidity and precision required for high‑accuracy inspection workflows.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGAGEMAKER TF-RISER2:\u003c\/strong\u003e \u003cspan\u003eRiser Block, 2.00\" Tall (Set of 2)\u003c\/span\u003e\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45776523853858,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/TF-RISER2_6802fa1a-5b0c-4af4-91dc-62356eb6f6b6.png?v=1789626256"},{"product_id":"tf-riser3-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"TF-RISER3 | MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cstrong\u003e3.00” Riser Block (Set of 2)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eGagemaker TF‑RISER3\u003c\/strong\u003e is a precision‑machined \u003cstrong\u003e3.00\" Riser Block Set\u003c\/strong\u003e engineered to elevate and support gages, fixtures, and components during MIC TRAC calibration and dimensional inspection. Built to Gagemaker’s exacting tolerances, these riser blocks provide exceptional stability and repeatable positioning—ensuring accurate, consistent measurement results in demanding industrial environments.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWhether you’re calibrating thread gages, setting up specialty fixtures, or supporting large components for metrology applications, the \u003cstrong\u003eTF‑RISER3 \u003c\/strong\u003edelivers the rigidity and precision required for high‑accuracy inspection workflows.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGAGEMAKER TF-RISER3:\u003c\/strong\u003e \u003cspan\u003eRiser Block, 3.00\" Tall (Set of 2)\u003c\/span\u003e\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45776524345378,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/TF-RISER3.png?v=1789625687"},{"product_id":"cal-pak-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"CAL-PAK | MIC-TRAC Calibration Fixtures | MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cstrong\u003eComplete Calibration Package (All fixtures are also individually available.)\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eIncludes: TF-1F, TF-CA, TF-DG, TF-IND, TF-LG-2, TF-LG-3, TF-SA, TF-SS, TF-SV, TF-VB, and storage case.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCal-Pak, Calibration Fixture Kit\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eIncludes: TF-1F, TF-CA, TF-DG, TF-IND, TF-LG-2, TF-LG-3, TF-SA, TF-SS, TF-SV, TF-VB, TF-VN, and storage case.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor gage calibration, the optional \u003cstrong\u003eCAL-PAK\u003c\/strong\u003e fixture package can be included with any MIC TRAC™ system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eCAL-PAK\u003c\/strong\u003e is an assortment of fixtures that attach to the base unit for holding gages securely during the calibration process.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eProper positioning of the gage improves the accuracy of the calibration and provides more consistent results.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eCAL-PAK\u003c\/strong\u003e receiver blocks include precision, calibrated surfaces designed for mounting all the various setting blocks.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDepending on the requirements of the application, each pair of \u003cstrong\u003eCAL-PAK \u003c\/strong\u003esetting blocks is precisely ground with either a flat or tapered gauging surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSetting blocks are supplied in sets of two, with various degrees of taper available.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGAGEMAKER CAL-PAK:\u003c\/strong\u003e \u003cspan\u003eCalibration Fixture Package \u003c\/span\u003e\u003cspan\u003eincludes:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTF-1F, TF-IND, TF-DG, TF-CA, TF-LG-2, TF-LG-3, TF-SA, TF-SV, TF-SS, TF-VB, \u0026amp; Storage Case.\u003c\/span\u003e\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45787114864674,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/CAL-PAK.jpg?v=1789562912"},{"product_id":"tf-1f-mic-trac-calibration-fixtures-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"TF-SB | MIC TRAC Accessories | MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement SystemS","description":"\u003cp\u003e\u003cstrong\u003eAdjustable height support table\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe\u003cstrong\u003e Gagemaker TF‑SB\u003c\/strong\u003e is a precision‑machined side block fixture designed to expand the mounting and support capabilities of your MIC TRAC calibration system. Engineered for stability, alignment, and repeatability, the \u003cstrong\u003eTF‑SB\u003c\/strong\u003e provides a secure lateral mounting surface for specialized gages, adapters, and custom inspection setups.\u003c\/p\u003e\n\u003cp\u003eBuilt from high‑strength materials to withstand demanding shop‑floor environments.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGAGEMAKER TF-SB: \u003c\/strong\u003e\u003cspan\u003eSupport Base, Adjustable Height \u003c\/span\u003e\u003cspan\u003eSpans across MIC TRAC.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45787182170146,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/TF-SB.jpg?v=1789560010"},{"product_id":"tf-bi-mic-trac-calibration-fixtures-mic-trac™-blocks-fixtures-and-accessories-mic-trac-setting-blocks-gage-setting-and-part-measurement-systems","title":"TF-BI | MIC Trac Calibration Fixtures | MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cstrong\u003eBase support plate for setting dial bore gages\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eGagemaker TF‑BI\u003c\/strong\u003e is a precision‑ground setting block engineered for accurate calibration and verification of bore‑type and inside‑diameter inspection gages on MIC TRAC 3000 systems. Built to Gagemaker’s industry‑leading standards, the \u003cstrong\u003eThe Gagemaker TF‑BI is a precision‑ground setting block engineered for accurate calibration and verification of bore‑type and inside‑diameter inspection gages on MIC TRAC 3000 systems.\u003c\/strong\u003e Built to Gagemaker’s industry‑leading standards, the \u003cstrong\u003eTF‑BI\u003c\/strong\u003e provides a stable, repeatable reference surface that ensures your measurement tools deliver consistent, traceable results in demanding shop‑floor and field environments. provides a stable, repeatable reference surface that ensures your measurement tools deliver consistent, traceable results in demanding shop‑floor and field environments. The \u003cstrong\u003eTF-BI \u003c\/strong\u003eis ideal for bore gages, pivot‑arm gages, and other I.D. inspection tools requiring a calibrated internal reference.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eGAGEMAKER TF-BI: \u003c\/strong\u003eCalibration Fixture\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDial Bore Gages **** (TF-1F Block Set required for use) ****\u003c\/span\u003e\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45789649141794,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/TF-BI.png?v=1789559389"},{"product_id":"tf-ca-mic-trac-calibration-fixtures-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"TF-CA | MIC TRAC Calibration Fixtures | MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cstrong\u003eCaliper calibration accessory dial, digital and vernier calipers. Includes TF-SA support arm.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eGagemaker TF‑CA\u003c\/strong\u003e is a precision‑engineered calibration anvil designed for secure, repeatable positioning of inspection gages on MIC TRAC 3000 and MIC TRAC 4000 systems. As part of Gagemaker’s professional‑grade calibration fixture lineup, the \u003cstrong\u003eTF‑CA\u003c\/strong\u003e ensures accurate alignment, stable mounting, and consistent measurement results across a wide range of dimensional inspection tools.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBuilt from high‑grade tool steel to maintain dimensional integrity under continuous shop‑floor use, The \u003cstrong\u003eTF-CA\u003c\/strong\u003e provides secure gage support, reducing operator variability and enhancing measurement repeatability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGAGEMAKER TF-CA:\u003c\/strong\u003e \u003cspan\u003eCalibration Fixture\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDial, Digital, \u0026amp; Vernier Calipers, includes TF-SA Support Arm\u003c\/span\u003e\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45789655040034,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/TF-CA.png?v=1789559205"},{"product_id":"tf-cg-mic-trac-calibration-fixtures-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"TF-CG | MIC TRAC Calibration Fixtures | MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cstrong\u003eCalibration Fixture, \u003c\/strong\u003e\u003cstrong\u003eUniversal Clamping Fixture for Indicators \u0026amp; Gages\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e **** (Single TF-1F Block required for use) ****\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eGagemaker TF‑CG\u003c\/strong\u003e is a precision‑ground calibration contact designed for use with the \u003cstrong\u003eCG‑1001 and CG‑1001E bench calibrators\u003c\/strong\u003e, ensuring accurate, repeatable calibration of AGD‑style indicators and inspection gages. Built to Gagemaker’s exacting standards, the TF‑CG provides a stable, traceable reference surface essential for high‑accuracy dimensional verification.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eTF_CG \u003c\/strong\u003eprovides perfect alignment and compatibility with Gagemaker’s industry‑standard bench calibrators and is ideal for calibrating dial indicators, digital indicators, and other precision measurement tools.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGAGEMAKER TF-CG: \u003c\/strong\u003eCalibration Fixture\u003cbr\u003eUniversal Clamping Fixture for Indicators \u0026amp; Gages **** (Single TF-1F Block required for use) ****\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45789693804578,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/TF-CG_2982bf68-bb90-4b18-9b57-566fd70af383.png?v=1789559053"},{"product_id":"tf-dg-mic-trac-calibration-fixtures-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"TF-DG | MIC TRAC Calibration Fixtures | MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cstrong\u003eCalibration fixture for depth micrometer.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Gagemaker \u003cstrong\u003eTF‑DG\u003c\/strong\u003e is a precision‑engineered depth‑gage calibration fixture designed for use with MIC TRAC 3000 and MIC TRAC 4000 systems. Built to Gagemaker’s exacting standards, the \u003cstrong\u003eTF‑DG\u003c\/strong\u003e provides a stable, repeatable reference surface for setting and verifying depth gages, ensuring accurate and traceable dimensional measurements in demanding industrial environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptimized for MIC TRAC Systems\u003c\/strong\u003e \u0026amp; designed to mount securely on MIC TRAC receiver pads, maintaining perfect alignment during calibration, the \u003cstrong\u003eTF-DG \u003c\/strong\u003esupports Depth Gages \u0026amp; Digital Depth Tools that are ideal for verifying depth micrometers, digital depth gages, and specialty depth‑measurement tools.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGAGEMAKER TF-DG: \u003c\/strong\u003eCalibration Fixture, Depth Micrometers.\u003c\/p\u003e\n\u003cp\u003e **** (Single TF-1F Block required for use) ****\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45789710516258,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/TF-DG_47c652df-c07a-4791-9ec7-08f15340f670.png?v=1789558558"},{"product_id":"tf-ind-mic-trac-calibration-fixtures-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"TF-IND | MIC TRAC Calibration Fixtures | MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eTF-IND, AGD dial indicator. Calibration fixture\u003c\/strong\u003e (includes .375” and 8mm bushing)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe following base units and accessories are available for larger requirements for either the MIC TRAC 3000 or MIC TRAC 4000.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eGagemaker TF‑IND\u003c\/strong\u003e is a precision‑engineered calibration fixture designed specifically for \u003cstrong\u003eAGD‑style dial indicators\u003c\/strong\u003e, including both \u003cstrong\u003e0.375\"\u003c\/strong\u003e and \u003cstrong\u003e8 mm\u003c\/strong\u003e stem diameters. Built for seamless use on MIC TRAC systems, the TF‑IND provides stable, repeatable positioning to ensure your indicators deliver accurate, traceable measurements every time.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eTF-IND\u003c\/strong\u003e mounts securely to MIC TRAC receiver pads for stable, accurate indicator verification \u0026amp; is built to withstand heavy shop‑floor use while maintaining dimensional integrity.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGAGEMAKER\u003c\/strong\u003e \u003cstrong\u003eTF-IND: \u003c\/strong\u003e\u003cspan\u003eCalibration Fixture\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAGD Dial Indicators (includes 0.375\" \u0026amp; 8 mm Split Bushings)\u003c\/span\u003e\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45789727424546,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/TF-IND_277f3a7f-e7fb-4a57-a3fe-05061fe2ca14.png?v=1789558172"},{"product_id":"tf-lg-2-mic-trac-calibration-fixtures","title":"TF-LG-2 | MIC TRAC Calibration Fixtures |MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cstrong\u003eLead gage calibration fixture for either Allen or Gagemaker gages (LG-5002) \u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eGagemaker TF‑LG‑2\u003c\/strong\u003e is a precision‑machined calibration fixture engineered for mounting and verifying large‑format inspection gages on MIC TRAC 3000 and 4000 systems. As part of Gagemaker’s professional‑grade calibration lineup, the \u003cstrong\u003eTF‑LG‑2\u003c\/strong\u003e provides the stability, alignment, and repeatability required for accurate dimensional verification in demanding industrial environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGAGEMAKER TF-LG-2:\u003c\/strong\u003e \u003cspan\u003eCalibration Fixture\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2 Point Lead Gages for LG-5002, LG-6001, LG-6002 Lead Gages \u0026amp; Allen Lead Gages **** (Single TF-1F Block required for use) ****\u003c\/span\u003e\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45789902340130,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/TF-LG-2.png?v=1789555734"},{"product_id":"tf-lg-3-mic-trac-calibration-fixtures-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"TF-LG-3 | MIC TRAC Calibration Fixtures | MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cstrong\u003eGagemaker lead gage (LG-5003) calibration fixture\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eGagemaker TF‑LG‑3\u003c\/strong\u003e is a heavy‑duty calibration fixture engineered for mounting and verifying large‑format inspection gages on MIC TRAC 3000 and 4000 systems. Designed for maximum rigidity and alignment, the \u003cstrong\u003eTF‑LG‑3\u003c\/strong\u003e ensures stable, repeatable positioning of oversized gages, making it essential for precision calibration in demanding industrial environments.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCalibration Fixture\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e3 Point Lead Gages for LG-5003 Lead Gages **** (Single TF-1F Block required for use) ****\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45789908959266,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/TF-LG-3.png?v=1789555244"},{"product_id":"tf-sa-mic-trac-calibration-fixtures-mic-trac™-blocks-fixtures-and-accessories","title":"TF-SA | MIC TRAC Calibration Fixtures | MIC TRAC™ Blocks, Fixtures and Accessories |","description":"\u003cp\u003e\u003cstrong\u003eSupport arm for TF-CA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eGagemaker TF‑SA\u003c\/strong\u003e is a precision‑machined support anvil fixture designed for stabilizing and positioning inspection gages during MIC TRAC calibration operations. As part of Gagemaker’s professional‑grade CAL‑PAK fixture set, the \u003cstrong\u003eTF‑SA\u003c\/strong\u003e ensures consistent alignment, improved repeatability, and reliable calibration results across a wide range of dimensional inspection tools.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eTF-SA\u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003eprovides a secure, rigid base for holding gages during calibration, reducing operator variation. It's also built to withstand heavy shop‑floor use while maintaining dimensional integrity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGAGEMAKER\u003c\/strong\u003e \u003cstrong\u003eTF-SA\u003c\/strong\u003e: \u003cspan\u003eSupport Arm for Larger Instruments.\u003c\/span\u003e\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45790159175714,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/TF-SA.png?v=1789554798"},{"product_id":"tf-ss-mic-trac-calibration-fixtures-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"TF-SS | MIC TRAC Calibration Fixtures | MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cstrong\u003eStraight support accessory for support of extended probes.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eGagemaker \u003c\/span\u003e\u003cspan\u003eTF‑SS\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eis \u003c\/span\u003e\u003cspan\u003ea \u003c\/span\u003e\u003cspan\u003eprecision‑machined \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003esmall \u003c\/span\u003e\u003cspan\u003esupport \u003c\/span\u003e\u003cspan\u003efixture\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003edesigned \u003c\/span\u003e\u003cspan\u003eto \u003c\/span\u003e\u003cspan\u003esecurely \u003c\/span\u003e\u003cspan\u003eposition \u003c\/span\u003e\u003cspan\u003einspection \u003c\/span\u003e\u003cspan\u003egages \u003c\/span\u003e\u003cspan\u003eduring \u003c\/span\u003e\u003cspan\u003eMIC \u003c\/span\u003e\u003cspan\u003eTRAC \u003c\/span\u003e\u003cspan\u003ecalibration \u003c\/span\u003e\u003cspan\u003eoperations. \u003c\/span\u003e\u003cspan\u003eAs \u003c\/span\u003e\u003cspan\u003epart \u003c\/span\u003e\u003cspan\u003eof \u003c\/span\u003e\u003cspan\u003eGagemaker’s \u003c\/span\u003e\u003cspan\u003eprofessional‑grade \u003c\/span\u003e\u003cspan\u003eCAL‑PAK \u003c\/span\u003e\u003cspan\u003efixture \u003c\/span\u003e\u003cspan\u003eset, \u003c\/span\u003e\u003cspan\u003ethe \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eTF‑SS\u003c\/strong\u003e \u003c\/span\u003e\u003cspan\u003eprovides \u003c\/span\u003e\u003cspan\u003estable, \u003c\/span\u003e\u003cspan\u003erepeatable \u003c\/span\u003e\u003cspan\u003esupport \u003c\/span\u003e\u003cspan\u003efor \u003c\/span\u003e\u003cspan\u003esmaller \u003c\/span\u003e\u003cspan\u003egages, \u003c\/span\u003e\u003cspan\u003eensuring \u003c\/span\u003e\u003cspan\u003eaccurate \u003c\/span\u003e\u003cspan\u003eand \u003c\/span\u003e\u003cspan\u003etraceable \u003c\/span\u003e\u003cspan\u003ecalibration \u003c\/span\u003e\u003cspan\u003eresults \u003c\/span\u003e\u003cspan\u003eacross \u003c\/span\u003e\u003cspan\u003ea \u003c\/span\u003e\u003cspan\u003ewide \u003c\/span\u003e\u003cspan\u003erange \u003c\/span\u003e\u003cspan\u003eof \u003c\/span\u003e\u003cspan\u003edimensional \u003c\/span\u003e\u003cspan\u003einspection \u003c\/span\u003e\u003cspan\u003etools.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGAGEMAKER TF-SS:\u003c\/strong\u003e \u003cspan\u003eStraight Support Accessory\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003efor Support of Extended Probes **** (Single TF-1F Block required for use) ****\u003c\/span\u003e\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45790161797154,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/TF-SS_38bf1d94-d476-49f8-bd2a-440fbf548a78.png?v=1789554335"},{"product_id":"tf-sv-mic-trac-calibration-fixtures-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"TF-SV | MIC TRAC Calibration Fixtures | MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cstrong\u003e“V” support accessory for calibrating micrometers and standards\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eGagemaker TF‑SV\u003c\/strong\u003e is a precision‑engineered micrometer and standards fixture designed for use with MIC TRAC 3000 and 4000 systems. As part of the official CAL‑PAK fixture set, the \u003cstrong\u003eTF‑SV\u003c\/strong\u003e provides stable, accurate positioning of micrometers and micrometer standards, ensuring repeatable, traceable calibration results across a wide range of measurement ranges.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGAGEMAKER TF-SV: \u003c\/strong\u003e\"V\" Support Accessory\u003cbr\u003efor Calibrating Micrometers \u0026amp; Standards **** (TF-1F Block Set required for use) ****\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45790178344994,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/TF-SV.png?v=1789547541"},{"product_id":"tf-ti-mic-trac-calibration-fixtures-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"TF-TI | MIC TRAC Calibration Fixtures | MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cstrong\u003eTest indicator calibration block\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Gagemaker \u003cstrong\u003eTF‑TI\u003c\/strong\u003e is a precision‑machined calibration fixture designed for securing and aligning tapered or threaded inspection tools on MIC TRAC 3000 and 4000 systems. Engineered for maximum stability and repeatability, the \u003cstrong\u003eTF‑TI\u003c\/strong\u003e ensures accurate, traceable calibration of specialized indicators used in oilfield, machining, and precision‑manufacturing environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGAGEMAKER TF-TI: \u003c\/strong\u003eCalibration Fixture\u003cbr\u003eTest Indicator **** (Single TF-1F Block required for use) ****\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45790224515106,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/TF-TI.png?v=1789544687"},{"product_id":"tf-vb-mic-trac-calibration-fixtures-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"TF-VB | MIC TRAC Calibration Fixtures | MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cstrong\u003e“V” block fixture for calibration of Gagemaker’s TH-3004 and MRP-2002 Upper arms\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eGagemaker \u003c\/span\u003e\u003cspan\u003eTF‑VB\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eis \u003c\/span\u003e\u003cspan\u003ea \u003c\/span\u003e\u003cspan\u003eprecision‑engineered \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ebore \u003c\/span\u003e\u003cspan\u003egage \u003c\/span\u003e\u003cspan\u003eand \u003c\/span\u003e\u003cspan\u003epivot‑arm \u003c\/span\u003e\u003cspan\u003egage \u003c\/span\u003e\u003cspan\u003efixture\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003edesigned \u003c\/span\u003e\u003cspan\u003efor \u003c\/span\u003e\u003cspan\u003euse \u003c\/span\u003e\u003cspan\u003ewith \u003c\/span\u003e\u003cspan\u003eMIC \u003c\/span\u003e\u003cspan\u003eTRAC \u003c\/span\u003e\u003cspan\u003e3000 \u003c\/span\u003e\u003cspan\u003eand \u003c\/span\u003e\u003cspan\u003e4000 \u003c\/span\u003e\u003cspan\u003esystems. \u003c\/span\u003e\u003cspan\u003eAs \u003c\/span\u003e\u003cspan\u003ethe \u003c\/span\u003e\u003cspan\u003ededicated \u003c\/span\u003e\u003cspan\u003emounting \u003c\/span\u003e\u003cspan\u003efixture \u003c\/span\u003e\u003cspan\u003efor \u003c\/span\u003e\u003cspan\u003eGagemaker’s \u003c\/span\u003e\u003cspan\u003epivot‑arm \u003c\/span\u003e\u003cspan\u003eand \u003c\/span\u003e\u003cspan\u003einternal‑diameter \u003c\/span\u003e\u003cspan\u003einspection \u003c\/span\u003e\u003cspan\u003egages, \u003c\/span\u003e\u003cspan\u003ethe\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eTF‑VB\u003c\/strong\u003e \u003c\/span\u003e\u003cspan\u003eensures \u003c\/span\u003e\u003cspan\u003estable, \u003c\/span\u003e\u003cspan\u003erepeatable \u003c\/span\u003e\u003cspan\u003epositioning—delivering \u003c\/span\u003e\u003cspan\u003eaccurate, \u003c\/span\u003e\u003cspan\u003etraceable \u003c\/span\u003e\u003cspan\u003ecalibration \u003c\/span\u003e\u003cspan\u003eresults \u003c\/span\u003e\u003cspan\u003efor \u003c\/span\u003e\u003cspan\u003ecritical \u003c\/span\u003e\u003cspan\u003eI.D. \u003c\/span\u003e\u003cspan\u003emeasurement \u003c\/span\u003e\u003cspan\u003etools.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGAGEMAKER TF-VB:\u003c\/strong\u003e \u003cspan\u003eCalibration Fixture\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eV-Block for TH-3004 \u0026amp; MRP-2002 Upper Arms\u003c\/span\u003e\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45790457561122,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/TF-VB_0bec555c-0162-40d5-8561-9d8fc6c2e403.png?v=1789544326"},{"product_id":"tf-vn-mic-trac-calibration-fixtures-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"TF-VN | MIC TRAC Calibration Fixtures | MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cstrong\u003e“V” blocks for calibration of axial travel probes and bore gages\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eGagemaker TF‑VN\u003c\/strong\u003e is a precision‑machined \u003cstrong\u003eV‑notch support fixture\u003c\/strong\u003e designed to cradle and stabilize round, cylindrical, or shaft‑type inspection tools during MIC TRAC calibration. As part of Gagemaker’s professional CAL‑PAK fixture lineup, the \u003cstrong\u003eTF‑VN\u003c\/strong\u003e ensures centered, repeatable positioning—delivering accurate, traceable calibration results for a wide range of dimensional inspection instruments.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGAGEMAKER TF-VN:\u003c\/strong\u003e \u003cspan\u003eCalibration Fixture\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eV-Block for Axial Travel Probes \u0026amp; Bore Gages **** (Single TF-1F Block required for use) ****\u003c\/span\u003e\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45790465851426,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/TF-VN.png?v=1789541597"},{"product_id":"crc-mt3000-mic-trac-calibration-fixtures-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"CRC-MT3000 | MIC TRAC Calibration Fixtures | MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems |","description":"\u003cp\u003e\u003cstrong\u003e Complete procedural documentation for the calibration of handheld inspection equipment \u003cbr\u003eincluding: O.D. \u0026amp; I.D. micrometers, calipers, depth micrometers, and more. (MT-3000 ONLY)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGAGEMAKER CRC-MT3000:\u003c\/strong\u003e \u003cspan\u003eComplete Procedural Documentation for the Calibration of Handheld Inspection Equipment including; O.D. \u0026amp; I.D. Micrometers, Calipers, Depth Micrometers, Ring and Plug Gages, and more. Enclosed on one flash drive.\u003c\/span\u003e\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45790482956322,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/CRC-MT-3000.png?v=1789541227"},{"product_id":"awh-100-mic-trac-accessories-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"AWH-100 | MIC TRAC Accessories | MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cstrong\u003eHex wrench holder with wrenches\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Gagemaker \u003cstrong\u003eAWH‑100\u003c\/strong\u003e is a precision‑built adjustable wrench handle designed to provide secure, ergonomic control when operating Gagemaker thread inspection gages. Engineered for durability and ease of use, the \u003cstrong\u003eAWH‑100\u003c\/strong\u003e ensures stable handling, consistent torque application, and improved operator comfort during critical inspection and calibration tasks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGAGEMAKER AWH-100: \u003c\/strong\u003e\u003cspan\u003eAllen Wrench Holder with Wrenches\u003c\/span\u003e\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45790703812642,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/AWH-100.png?v=1789391740"},{"product_id":"mt-4-usbc-mic-trac-accessories-mic-trac™-blocks-fixtures-and-accessories-gage-setting-and-part-measurement-systems","title":"TF-2R | MIC TRAC Accessories | MIC TRAC™ Blocks, Fixtures and Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003e\u003cstrong\u003e ⅜” diameter carbide anvil set\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eGagemaker TF‑2R\u003c\/strong\u003e is a precision‑machined riser block set engineered to elevate and support inspection fixtures on MIC TRAC calibration systems. Designed for applications requiring additional height or clearance, the \u003cstrong\u003eTF‑2R\u003c\/strong\u003e ensures perfect alignment, stable positioning, and repeatable measurement accuracy across a wide range of tooling setups.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGAGEMAKER TF-2R: \u003c\/strong\u003eCarbide Anvil Set, 3\/8\" Diameter\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45792839893026,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/TF-2R.png?v=1789390221"},{"product_id":"tf-sb-1-mic-trac-accessories-gage-setting-and-part-measurement-systems","title":"TF-SB-1 | MIC TRAC Accessories | Gage Setting and Part Measurement Systems","description":"\u003cp\u003eBearing rail support base\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ehe \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eGagemaker \u003c\/span\u003e\u003cspan\u003eTF‑SB‑1\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eis \u003c\/span\u003e\u003cspan\u003ea \u003c\/span\u003e\u003cspan\u003eprecision‑engineered \u003c\/span\u003e\u003cspan\u003eside \u003c\/span\u003e\u003cspan\u003eblock \u003c\/span\u003e\u003cspan\u003efixture \u003c\/span\u003e\u003cspan\u003edesigned \u003c\/span\u003e\u003cspan\u003eto \u003c\/span\u003e\u003cspan\u003eprovide \u003c\/span\u003e\u003cspan\u003estable \u003c\/span\u003e\u003cspan\u003elateral \u003c\/span\u003e\u003cspan\u003esupport \u003c\/span\u003e\u003cspan\u003efor \u003c\/span\u003e\u003cspan\u003egages, \u003c\/span\u003e\u003cspan\u003eadapters, \u003c\/span\u003e\u003cspan\u003eand \u003c\/span\u003e\u003cspan\u003especialty \u003c\/span\u003e\u003cspan\u003etooling \u003c\/span\u003e\u003cspan\u003eon \u003c\/span\u003e\u003cspan\u003eMIC \u003c\/span\u003e\u003cspan\u003eTRAC \u003c\/span\u003e\u003cspan\u003ecalibration \u003c\/span\u003e\u003cspan\u003esystems. \u003c\/span\u003e\u003cspan\u003eBuilt \u003c\/span\u003e\u003cspan\u003efor \u003c\/span\u003e\u003cspan\u003eaccuracy, \u003c\/span\u003e\u003cspan\u003erigidity, \u003c\/span\u003e\u003cspan\u003eand \u003c\/span\u003e\u003cspan\u003erepeatability, \u003c\/span\u003e\u003cspan\u003ethe \u003c\/span\u003e\u003cspan\u003eTF‑SB‑1 \u003c\/span\u003e\u003cspan\u003eenhances \u003c\/span\u003e\u003cspan\u003eyour \u003c\/span\u003e\u003cspan\u003esetup \u003c\/span\u003e\u003cspan\u003eflexibility \u003c\/span\u003e\u003cspan\u003ewhile \u003c\/span\u003e\u003cspan\u003emaintaining \u003c\/span\u003e\u003cspan\u003ethe \u003c\/span\u003e\u003cspan\u003ealignment \u003c\/span\u003e\u003cspan\u003estandards \u003c\/span\u003e\u003cspan\u003erequired \u003c\/span\u003e\u003cspan\u003efor \u003c\/span\u003e\u003cspan\u003ehigh‑precision \u003c\/span\u003e\u003cspan\u003edimensional \u003c\/span\u003e\u003cspan\u003einspection.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe TF‑SB‑1 is commonly used for supporting side‑mounted gages and adapters and holding custom fixtures requiring lateral stability,\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGAGEMAKER TF-SB1:\u003c\/strong\u003e \u003cspan\u003eSupport Base, Bearing Rail\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMounts on MIC TRAC Bearing Rail\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Al Wafa General Trading","offers":[{"title":"Default Title","offer_id":45792884359202,"sku":null,"price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/files\/TF-SB-1.png?v=1789389851"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/7027\/1778\/collections\/MIC_TRAC_3000.jpg?v=1788855024","url":"https:\/\/alwafadubai.com\/collections\/gage-setting-and-part-measurement-systems-mic-trac-3000.oembed","provider":"Al Wafa General Trading","version":"1.0","type":"link"}